Juiceman JM300CAN Use and Care Manual download pdf (Page 6)

Step 7: Place juice pitcher

Slide froth separator into juice pitcher, then position pitcher beneath the

juice spout. Be sure that the juice spout empties into the larger opening

in the pitcher lid.

Storing & inserting food pusher

Store food pusher in feed tube until you are ready to juice. To insert,

rotate food pusher until the groove in the food pusher is properly

aligned with the ridge in the feed tube.

DISASSEMBLY INSTRUCTIONS

Important: Always make sure the juicer is unplugged before starting to

disassemble.

Step 1: Release lid locking lever

While pressing down on safety lock button, swing lid locking lever away

from feed tube. Release safety lock button.

Step 2: Remove lid

Grasp lid by the feed tube and lift to remove from juice bowl. Make sure

to hold food pusher in place if it is being stored inside the feed tube, or

– for easier cleaning – unlock feed tube by rotating clockwise and remove

from the lid.

Step 3: Remove pulp basket

Grasp bottom of the pulp basket and pull it away from juicer, titling

slightly to release it from behind the pulp ejection spout.

Step 4: Remove juice bowl

Grasp sides of juice bowl with both hands. With filter basket still inside,

carefully lift juice bowl off motor base, rotating slightly if necessary. The

filter basket can then be removed from the juice bowl for cleaning.

Caution: Cutting blades are extremely sharp! Use care when handling

filter basket.

CARE AND CLEANING

Important: Always unplug juicer from the outlet before assembly or

disassembly, and before cleaning.

This appliance requires little maintenance. It contains no user serviceable

parts. Do not try to repair it yourself. Any servicing requiring

disassembly must be performed by a qualified appliance repair

technician.

CLEANING YOUR JUICER

Juicer should be cleaned after every use. Make sure juicer is unplugged

from the outlet; follow DISASSEMBLY INSTRUCTIONS before following

cleaning instructions below.

1. Using a sponge or damp cloth, clean motor base, rubber feet and

underside of juicer. Use a damp toothbrush or cloth to clean juice from

the inside the motor base hub (on top of motor base).

Important: Do not immerse motor base in water, or spray with water.

Clean only by wiping with a damp sponge, cloth or paper towel.

2. All juicer parts – except motor base – are washable in warm, soapy

water, using any mild liquid dishwashing detergent. Do not use any

products containing ammonia or scouring powders, as these can dull,

scratch or mar the surface.

3. Use cleaning brush provided to scrub lid and juice bowl. Do not use

metal brushes or pads.

4. To properly clean food pusher, remove circular cap in the cover of the

food pusher. To remove, grasp cap and lift directly out of food pusher,

using the notch for leverage. Once parts are dry, replace cap.

5. To clean filter basket, use cleaning brush provided to make sure tiny

holes in mesh filter are not clogged. This can be accomplished by

holding filter basket under a running faucet while brushing the mesh

filter screen from both inside and outside of filter basket.

Note: Occasionally any removable parts may be washed in a dishwasher,

ONLY if they are placed on the top shelf. Washing in warm, soapy water

after each use, however, should be sufficient.

Tip: Pulp from pulp basket can be used in many different ways: making

breads, muffins, cakes, soup stocks, compressed facial packs and garden

compost material.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Comments to this Manuals

No comments

Juiceman JM300CAN Use and Care Manual Page 6

Comments to this Manuals

Related products and manuals for Juice makers Juiceman JM300CAN